| SEAL KIT PART # | COMPONENT PT # | QTY | DESCRIPTION |
| Single (Integral) | |||
| P3000-S | W62-26-16 | 1 | PUMP SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Single (Continental) | |||
| P3000-S-C | W62-26-18 | 1 | PUMP SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Multiple | |||
| P3000-T | TA-2995-242 | 2 | HOUSING GASKET SEAL |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Motor (Integral) | |||
| M3000-S | W62-49-9 | 1 | MOTOR SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Motor (Continental) | |||
| M3000-S-C | W62-49-11 | 1 | MOTOR SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Special Motor Seal | |||
| M3000-SPL | W62-49-9 | 1 | MOTOR SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| 558-00498-SR | 1 | SEAL RETAINER | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| Stanley Motor | |||
| M3000-STANLEY | 961-01166 | 1 | BRASS RETAINER |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| K-2995-128 | 1 | O'RING | |
| Q-2995-8 | 1 | O'RING | |
| J-2909-16 | BACKUP | ||
| Motor (Integral w/excluder) | |||
| M3000-S-EX | W62-49-9 | 1 | MOTOR SHAFT SEAL |
| TA-2995-242 | 2 | HOUSING GASKET SEAL | |
| AZ-2915-2 | 1 | THRUST PLATE SEAL STRIP | |
| 226-00538 | 1 | EXCLUDER SEAL | |
NOTE: When selling seal kits for multiple units, a standard single kit is needed and one multiple kit for each additional set of gears. For instance, a triple P7500 would require one (1) P7500-S and two (2) P7500-T kits. These consist only of ‘seals’, no hardware is included. Click Here for Seal Kit Insertion Tools. Viton and high performance motor kits are available upon request.